04
2024
-
06
How to make thermoplastic mold?
Author:
Thermoplastic is a kind of resin that is solid at room temperature.
Thermoplastic is a kind of resin that is solid at room temperature, but will become plastic and soft when heated. This is due to the melting of crystals or flowing through the glass transition temperature.
Thermoplastic is a kind of resin that is solid at room temperature, but will become plastic and soft when heated. This is due to the melting of crystals or flowing through the glass transition temperature. During processing, usually through injection molding or similar blow molding process, the thermoplastic takes the shape of a mold, pours it into it in the form of a melt, and cools it to solidify into the desired shape. Some common thermoplastic materials include polyethylene (PE), polycarbonate (PC) and polyvinyl chloride (PVC).
Thermoplastic molding mold is to add plastic into the mold cavity, gradually heat and apply pressure, the plastic becomes viscous flow and fills the entire cavity, then stop heating, open the cooling device, open the mold after the plastic cools to below the thermal deformation temperature, and take out the products.
Thermoplastic molding dies have the characteristics of low density, good toughness, good impact resistance, good water and solvent resistance, low cost, and can be recycled directly. Besides, raw materials are easy to save, production efficiency is high, and production process energy consumption is low. Replacing thermosetting composites with thermoplastic composites can not only reduce weight, reduce cost, improve production efficiency, save energy, but also conform to the trend of environmental protection. Therefore, thermoplastic molding dies have also begun to be more and more widely used, such as in the automotive industry.
Introduction to Common Types of Plastic Molds
Injection molding is a widely used type of mold.
2024-06-04
Widespread application fields of molds
Molds play an important role in the automotive manufacturing industry.
2024-06-04
What are the processes for mold processing and forming
In the process of mold processing.
2024-06-04
Mobile website
Contact Information
Telephone:
E-mail:
Address:
No. 2, Xishan Road, Biquan Street, Bishan District, Chongqing (No. 2 Factory)